电解质
吸附
化学工程
材料科学
锂(药物)
色散(光学)
铜
无机化学
氧化物
范德瓦尔斯力
离子
相间
化学稳定性
表面能
图层(电子)
分散稳定性
离解(化学)
化学
四氟硼酸盐
作者
J. W. LEE,Minju Song,Y.-H. Cho,Chaeyeong Nam,Sejin Kim,Hyeon Jeong Kim,Dongwoo Kim,Jeesoo Park,Hyeokjin Kwon,Rama Krishnan Vasudevan,Sang Woo Han,Hee‐Tak Kim,Seungbum Hong,Nam‐Soon Choi
标识
DOI:10.1038/s41467-026-79429-1
摘要
Initially anode-free Li-metal batteries, in which Li-metal is constructed in-situ during charging, enable increased energy density. However, interfacial degradation reactions between the electrolyte and lithiophobic Cu prevent stable solid electrolyte interphase formation on the negative electrode. Here, we elucidate a time-evolving interfacial mechanism in which adsorption of electrolyte components contributes to initial interfacial layer formation and solid electrolyte interphase stability. Most organic solvents adsorb more strongly than Li-salt compounds on Cu through van der Waals dispersion interactions. This preferential adsorption produces a solvent-dominated interfacial layer that undergoes rapid compositional reconstruction during Cu oxide reduction upon initial charging. In contrast, lithium tetrafluoroborate possesses a tetrahedral anion with isotropic charge distribution that binds strongly to the Cu (111)/(100) surfaces and native Cu oxides, producing a tetrafluoroborate-driven interfacial layer that electronically passivates the Cu interface and promotes homogeneous Li nucleation. Consequently, lithium tetrafluoroborate-containing cells achieve 62% capacity retention after 300 cycles at an areal capacity of 4.1 mAh cm−2 and electrolyte conditions of 1.5 g Ah−1 and 4 μL cm−2, establishing a mechanistic basis for adsorption-driven interfacial design in initially anode-free Li-metal batteries. Initially anode-free lithium-metal batteries are limited by unstable interfacial reactions at Cu current collectors. Here, authors show that preferential anion adsorption can stabilize the copper interface and improve long-term cycling.
科研通智能强力驱动
Strongly Powered by AbleSci AI