材料科学
化学工程
碳化
碳纤维
锌
混合材料
多孔性
聚乙烯
电化学
比表面积
催化作用
复合材料
纳米技术
有机化学
冶金
电极
化学
复合数
物理化学
工程类
扫描电子显微镜
作者
Yuan Gao,Ngoc Huynh,Yun‐Yang Lee,Ki‐Joong Kim,Congjun Wang,Viet Hung Pham,Christopher Matranga
标识
DOI:10.1002/ente.202501104
摘要
Polyethylene (PE) waste is a challenge to upcycle into useful materials because this plastic tends to decompose into volatile compounds when heated at relatively low temperatures. In this work, mixtures of PE wastes into a hybrid graphitic porous carbon (HGPC) by a thermal oxidation pretreatment step, with assistance of an inert solid additive (KCl), to functionalize, crosslink, and stabilize the PE waste followed by carbonization and catalytic graphitization steps with a potassium carbonate catalyst, are upcycled. The PE waste‐derived HGPC (PW‐HGPC) has a hybrid structure composed of graphene‐like carbon nanosheets grown on the surface of carbon particles, high porosity with specific surface area, up to 1,763 m 2 g −1 , and good graphitic degree with average Raman I 2D / I G ratios of 0.53. When used as cathode material for zinc‐ion hybrid capacitors, this PW‐HGPC exhibits an excellent specific capacity, up to 126.7 mAh g −1 , at high mass loading of 10 mg cm −2 . Moreover, PW‐HGPC exhibits remarkable cycling stability with capacity retention of >94% after 10 000 cycles. Additionally, the KCl is recycled and reused over five times. This method provides a new solution for upcycling PE wastes into high value‐added carbon materials, not only for zinc‐ion hybrid capacitors but also for other electrochemical energy storage device applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI