Monte Carlo simulation‐guided design for size‐tuned tumor spheroid formation in 3D printed microwells

Tumor spheroid models have garnered significant attention in recent years as they can efficiently mimic in vivo models, and in addition, they offer a more controlled and reproducible environment for evaluating the efficacy of cancer drugs. In this study, we present the design and fabrication of a micromold template to form multicellular spheroids in a high-throughput and controlled-sized fashion. Briefly, polydimethylsiloxane-based micromolds at varying sizes and geometry were fabricated via soft lithography using 3D-printed molds as negative templates. The efficiency of spheroid formation was assessed using GFP-expressing human embryonic kidney 293 cells (HEK-293). After 7 days of culturing, circularity and cell viability of spheroids were >0.8 and 90%, respectively. At 1500 cells/microwell of cell seeding concentration, the spheroids were 454 ± 15 μm, 459 ± 7 μm, and 451 ± 18 μm when cultured in microwells with the diameters of 0.4, 0.6, and 0.8 μm, respectively. Moreover, the distance between each microwell and surfactant treatment before cell seeding notably impacted the uniform spheroid formation. The centrifugation was the key step to collect cells on the bottom of the microwells. Our findings were further verified using a commercial microplate. Furthermore, Monte Carlo simulation confirmed the seeding conditions where the spheroids could be formed. This study showed prominent steps in investigating spheroid formation, thereby leveraging the current know-how on the mechanism of tumor growth.