环氧树脂
材料科学
电介质
复合材料
电压
热的
高压
电气工程
光电子学
工程类
物理
气象学
作者
Zhengdong Wang,Ganqiu Yang,Xiaolong Cao,Mengli Li,Tong Zhang,Chenxin Liu,Yuanhang Zhou,Yonghong Cheng
出处
期刊:High voltage
[Institution of Engineering and Technology]
日期:2024-04-17
卷期号:9 (5): 1021-1032
被引量:64
摘要
Abstract Internal insulation of high‐voltage power modules is facing interesting failure risks, including high temperature overheating, breakdown fault, material cracking etc., so it is imperative to urgently develop new dielectric materials with high thermal conductivity ( λ ), outstanding electrical insulation, and thermal stability properties. A method to construct controllable liquid crystalline cross‐linking networks based on the synthesis of biphenyl epoxy monomer and the change of curing agent structures and curing temperature is proposed. The uniform nematic rod‐like liquid crystalline domains were obtained by using 4,4‐diaminodiphenylmethane as a curing agent under a pre‐curing temperature of 105°C. The resulting film (abbreviated as TD‐105) exhibited λ up to 0.53 W m −1 K −1 and a dielectric breakdown strength of 57.69 kV mm −1 , which showed a simultaneous enhancement of 178% and 16%, respectively, compared to traditional bisphenol A epoxy resin. Moreover, it also exhibited lower dielectric loss and magnitude of partial discharge while having higher glass‐transition temperature (190°C). A novel idea for the development of high‐performance epoxy insulating materials for the application of high‐voltage and large‐power electrical equipment is provided.
科研通智能强力驱动
Strongly Powered by AbleSci AI