Comparative numerical analysis of magnetized rectangular and trapezoidal fins

Abstract Fins are extended surfaces that are designed to dissipate heat from hot sources to their surroundings. The different profiles of fins are used on the equipment surface to improve heat transfer. Fins are extensively used in refrigeration, solar panels, superheaters, electric equipment, automobile parts, combustion engines, and electrical equipment. On the basis of these applications, we study the thermal performances of magnetized convective–radiative‐rectangular fins with magnetized trapezoidal fins with internal heat generation. The shooting technique is used to numerically study the suggested model. It is revealed that magnetized trapezoidal fins transfer more heat than magnetized rectangular fins. It is also revealed that magnetized trapezoidal fins have higher thermal transfer competence than magnetized rectangular fins. When thermal conductivity, radiation–conduction number, and convection–conduction number increase, the fin's efficiency increases. In addition, a Hartmann number indicating the magnetic effect is found to improve heat transfer from the fins. Increasing the magnetism parameter from 0.1 to 0.3 reduced temperature by approximately 4.5%, changing internal heat generation from 0.1 to 0.5 increased temperature distribution by approximately 16%, and changing the Peclet number from 0.1 to 0.3 increased temperature distribution by approximately 15%. The effect of heat transfer coefficient, thermal radiation–conduction and convection–conduction, and dimensionless radiation are also investigated on the performance of the fins.