Boosting generation of reactive oxygen and chlorine species on TNT photoanode and Ni/graphite fiber cathode towards efficient oxidation of ammonia wastewater

Photoelectrocatalytic (PEC) process combining the merits of photocatalysis and electrocatalysis is considered as a promising ammonia oxidation technology for water treatment. However, some key issues, such as the limited in situ generation of oxidants on photoanode, slow mass transfer problem and generation of nitrate/nitrite by-products hinder the further application of PEC process in the treatment of ammonia pollutant. In this study, the graphite felt (GF) cathodes modified by different transition metals (Ni, Fe, Mn, Co, Cu) were screened by physicochemical and photoelectrochemical characterizations. The results show that the Ni-GF cathode with more Ni0 uniformly distributed on the GF surface had the best electrocatalytic activity to generate H2O2. The PEC system composed of 10.0 wt% Ni-GF cathode and optimized titania nanotubes (TNTs) photoanode selectively converted about 96.1% ammonia to N2 within 90 min. Compared with the single TNTs photoanode system, the ammonia oxidation reaction rate constant of the synergistic PEC oxidation system was increased by about two times, which demonstrated the role of the oxidants simultaneously generated on both anode and cathode. The in situ generated reactive oxygen-based oxidants and chlorine-based oxidants interacted together, and ClO• acted a leading role in the ammonia oxidation which were confirmed by quenching and probe experiments. In addition, the contributions of •OH and ClO• were significantly improved in the synergistic PEC oxidation system, compared with the single TNTs photoanode system. Furthermore, the nitrate by-products generated by the ammonia oxidation were further reduced on the Ni-GF cathode. The large amount of active chlorine and active oxygen generated on the electrode diffused into the bulk, effectively overcoming the mass transfer limitation of direct oxidation. Therefore, the developed TNTs photoanode/Ni-GF cathode system can continuously and efficiently convert ammonia to N2 without the formation of nitrate/nitrite by-products.