材料科学
硅橡胶
超临界流体
硫化
多孔性
饱和(图论)
复合材料
气相二氧化硅
发泡剂
制作
天然橡胶
聚氨酯
替代医学
化学
有机化学
病理
组合数学
医学
数学
作者
Hao Yan,Kai Wang,Yan Zhao
标识
DOI:10.1002/mame.201600377
摘要
In spite of great concern on the wide application of silicone rubber foams, few works have been reported about easy-operating foaming method. In this study, the effects of silica content and foaming process on the porous structure of high-temperature-vulcanized silicon rubber foams are evaluated, which are prepared by supercritical CO2 at different conditions, with fumed silica used for reinforcement. Silicone rubber foams with cell size in 8–120 μm, cell density in 105–108 cm−3, and density between 0.45 and 0.9 g cm−3 are prepared under different saturation conditions. The results show that increasing silica content can decrease cell size. It is also found that cell density improves exponentially with increasing saturation pressure and decreasing saturation temperature. Besides, it demands less than 1 h for specimens to reach equilibrium on thickness around 3 mm. All the results indicate that the porous structures of silicone foams can be tailored by foaming process parameters facilely and are predictable with fitted equation.
科研通智能强力驱动
Strongly Powered by AbleSci AI