薄膜晶体管
旋涂
材料科学
活动层
聚合物
巴(单位)
光电子学
纳米技术
涂层
图层(电子)
复合材料
物理
气象学
作者
Benjamin Nketia‐Yawson,Hyo‐Sang Lee,Hae Jung Son,BongSoo Kim,Yong‐Young Noh
标识
DOI:10.1016/j.orgel.2015.11.033
摘要
Abstract We report high-performance organic thin-film transistors (OTFTs) with an ultrathin active layer of difluorobenzothiadiazole-dithienosilole copolymer (PDFDT) form by using the wire bar-coating process. The top-gate/bottom contact (TG/BC) OTFTs based on bar-coated PDFDT polymer as channel material and poly(methyl methacrylate) (PMMA) as gate dielectric show a hole mobility of up to 2.2 cm2 V−1s−1 with a current ON/OFF ratio (Ion/Ioff) of 104∼105, with the mobility being two times larger than that of the spin-coated PDFDT based OTFTs. The higher mobility of the bar-coated PDFDT polymer films can be attributed to the well-organized fibril structures of the polymer chains. Importantly, two different molecular weight polymers (Mn = 23 and 34 kDa) were employed to conduct these experiments and both batches showed about the same performance, which mitigates the typical batch-to-batch variation in OTFT performance. Furthermore, we explored the operational stability of the bar-coated OTFTs in ambient air and nitrogen environments. The bias-stress and cycling tests between the ON/OFF states of the bar-coated devices showed high stability in both nitrogen and air. Conclusively, here we demonstrate that (i) a simple bar-coating process is a better method to control and obtain good polymer morphology in comparison to spin-coating, and (ii) the PDFDT polymer has great potential to provide good reproducibility and stability in large-area OTFT devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI