Computer Simulations of Heterogeneous Reactions Controlled by Diffusion in Modified Aluminide Coatings on a Nickel-Based Superalloy

作者
Renata Bachorczyk Nagy,Marek Danielewski,Psantu K. Datta,Robert Filipek,G. Fisher
出处
期刊:Solid State Phenomena [Scientific.net]
卷期号:72: 53-58 被引量:3
标识
DOI:10.4028/www.scientific.net/ssp.72.53
摘要

Materials used in high temperature applications must possess both strength and corrosion resistance. The increase in operating temperatures of industrial energy systems and gas turbines, often coupled with the decrease in fuel quality being employed, has led to the extensive use of coatings capable of providing improved service life. The application of diffusion aluminide coatings on nickel based superalloys has beneficial influence on the high temperature performance of gas turbines operating at elevated temperatures. Platinum addition to basic aluminide coatings significantly improves the oxidation resistance of these coatings [1]. Evidence has now emerged from the oxidation and hot corrosion studies [2] that the high temperature corrosion (HTHC) performance of nickel based superalloys can be improved by the combined addition of platinum and rhodium to nickel aluminide coatings. In the Figure 1, a comparison of the SEM backscattered electron image of the corrosion products of the uncoated MAR M002, Pt-Aluminide, PtRh-Aluminide coatings after 100 h hot corrosion tests at 1173 K is presented. The protective capability of the aluminide coatings is conferred by the ability of the $-NiAl layer to provide aluminum to maintain an Al2O3 based scale at the surface. It is believed that the incorporation of Rh with Pt increases the stability of $-NiAl [3]. This type of coating is very resistant to oxidation owing to its ability to form a slow-growing and adherent oxide, Al2O3 [4,5]. However prolonged oxidation eventually process leads to the depletion of aluminium in the vicinity of the coating/scale interface decreasing the ability $-NiAl to reform the protective -Al2O3. In this work we will show the possibility of adopting a theoretical approach for describing the complex processes occurring in alloy/coating systems induced by reactions at coating/gas interface, e.g., oxidation, sulphidation or other complex processes like hot corrosion. The mathematical model for interdiffusion in multi-component open systems which allows for the description of a wide range of processes (e.g., processes stimulated by reactions at interfaces) is presented. The inverse problem of interdiffusion and the method which permits calculation of the intrinsic diffusivities, for an arbitrary number of components in a system, is also presented. This approach has been used to calculate the effective intrinsic diffusivities of the elements in Pt modified $-NiAl on MAR M002 superalloy. Subsequently, the evolution of the components’ concentration in oxidized Pt modified $-NiAl/MAR M002 system is presented and compared with the experimental results. Figure 1. Comparison of the SEM backscattered electron image of the corrosion products of the uncoated MAR M002, Pt-Aluminide and Pt-Rh-Aluminide coatings after 100 h hot corrosion test at 1173 K. Generalized Model of Interdiffusion This model follows Darken’s postulate [6] that the total mass flow is a sum of the diffusional and drift flows only. The equations of mass conservation (continuity equations), the appropriate expressions describing the fluxes, the postulate of constant molar volume of the system allow for a complete quantitative description of the diffusional transport process. Some aspects of this model for the closed system has been already published [7]. The formulation of the interdiffusion problem for the multicomponent open system and constant intrinsic diffusivities are presented bellow. Data: 1) molecular masses of the elements: M1, . . . , Mr (g mol ), where r denotes the number of components; 2) constant intrinsic diffusivities: D1, . . . , Dr (cm 2 s), which in general, may depend on composition, 3) initial position of the right end of the system (its right border): 7, 4) time of the process duration: t, 5) initial distribution of the elements:

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
神外王001完成签到 ,获得积分10
刚刚
starry完成签到,获得积分10
2秒前
2秒前
2秒前
微雨若,,完成签到 ,获得积分10
2秒前
兔子爱吃胡萝卜完成签到,获得积分10
3秒前
哈哈哈完成签到 ,获得积分10
4秒前
tianqiyue1022完成签到,获得积分10
4秒前
WL完成签到,获得积分10
4秒前
hoichai完成签到,获得积分10
6秒前
sun完成签到,获得积分10
6秒前
shineshine完成签到 ,获得积分10
7秒前
8秒前
9秒前
俏皮的凝云完成签到 ,获得积分10
9秒前
寒冷曼文完成签到,获得积分10
9秒前
zhaozhao完成签到,获得积分10
10秒前
诤心完成签到 ,获得积分10
10秒前
沐泽完成签到 ,获得积分10
10秒前
55z完成签到,获得积分10
11秒前
Haosen完成签到,获得积分10
11秒前
朱哥永正完成签到,获得积分10
12秒前
舒化奶完成签到,获得积分10
13秒前
鹤立名堂完成签到 ,获得积分10
13秒前
侧耳倾听完成签到 ,获得积分10
14秒前
M83发布了新的文献求助10
14秒前
Daniel完成签到,获得积分10
14秒前
14秒前
领导范儿的应助被京刹而语采纳,获得10
15秒前
英俊的铭的应助被科研通管家采纳,获得10
16秒前
JamesPei的应助被科研通管家采纳,获得10
16秒前
wanci的应助被科研通管家采纳,获得10
16秒前
16秒前
Akim的应助被科研通管家采纳,获得10
16秒前
顾矜的应助被科研通管家采纳,获得10
16秒前
16秒前
17秒前
田様的应助被科研通管家采纳,获得10
17秒前
wsy完成签到 ,获得积分10
17秒前
大个的应助被科研通管家采纳,获得20
17秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8185571
求助须知:如何正确求助?哪些是违规求助? 9574325
关于积分的说明 21835086
捐赠科研通 7783326
什么是DOI,文献DOI怎么找? 3434597
关于科研通互助平台的介绍 2558985
邀请新用户注册赠送积分活动 2481372