Post-Test Analyses of the CMMR-4 Test

Abstract Understanding the final distribution of core materials and their characteristics is important for decommissioning the Fukushima Daiichi Nuclear Power Station (1F). Such characteristics depend on the accident progression in each unit. However, boiling water reactor (BWR) accident progression involves great uncertainty. This uncertainty, which was clarified by MAAP-MELCOR crosswalk, cannot be resolved with existing knowledge and was thus addressed in this work through core material melting and relocation (CMMR) tests. For the test bundle, ZrO2 pellets were installed instead of UO2 pellets. A plasma heating system was used for the tests. In the CMMR-4 test, useful information was obtained on the core state just before slumping. The presence of macroscopic gas permeability of the core approaching ceramic fuel melting was confirmed, and the fuel columns remained standing, suggesting that the collapse of fuel columns, which is likely in the reactor condition, would not allow effective relocation of the hottest fuel away from the bottom of the core. This information will help us comprehend core degradation in boiling water reactors, similar to those in 1F. In addition, useful information on abrasive water suspension jet (AWSJ) cutting for debris-containing boride was obtained in the process of dismantling the test bundle. When the mixing debris that contains oxide, metal, and boride material is cut, AWSJ may be repelled by the boride in the debris, which may cut unexpected parts, thus generating a large amount of waste in cutting the boride part in the targeted debris. This information will help the decommissioning of 1F.