单片微波集成电路
材料科学
雷达
插入损耗
微波食品加热
天线(收音机)
印刷电路板
蚀刻(微加工)
波导管
光电子学
电介质
集成电路
介电损耗
光学
电气工程
工程类
电信
物理
复合材料
放大器
CMOS芯片
图层(电子)
作者
Thomas Galler,Tobias Chaloun,Winfried Mayer,Kevin Kröhnert,Dzmitry Starukhin,Norbert Ambrosius,Malte Schulz‐Ruhtenberg,Christian Waldschmidt
标识
DOI:10.1109/jmw.2021.3122067
摘要
This work presents a novel sensor packaging and a novel transition concept for radar applications above 150 GHz based on glass material. By using laser induced deep etching (LIDE) technology, glass vias and cavities are fabricated without degrading the mechanical stability of glass, as micro-cracks are completely avoided. Especially at high millimeter wave (mm-wave) frequencies, precise structuring on low dielectric loss materials and a high integration density are essential for low loss transitions. In this paper, an ultra compact FMCW radar monolithic microwave integrated circuit (MMIC) at 160 GHz is used to demonstrate this packaging technology. In addition, the high frequency signal is guided by a low loss transition to a deposed antenna via a dielectric waveguide (DWG) providing the antenna front end with mechanical flexibility. Thus, using plated through glass vias (TGVs) and a circulating solder ring, the package is hermetically sealed. The optical transparent glass package has a size of only${5.8}\,\rm {mm}\times {4.4}\,\rm {mm}\times {0.9}\,\rm {mm}$. A minimum measured insertion loss of 2.85 dB at 162 GHz from chip to DWG is achieved. The complete radar system with a range resolution of 12 mm is demonstrated via radar measurement.
科研通智能强力驱动
Strongly Powered by AbleSci AI