Elastic Properties of Alloy ZE10 Sheets Evaluation by Kerns Texture Parameters

材料科学 合金 弹性模量 纹理(宇宙学) 金属薄板 复合材料 弯曲 平坦度(宇宙学) 模数 冶金 图像(数学) 人工智能 计算机科学 物理 宇宙学 量子力学
作者
В. В. Усов,N. М. Shkatulyak,E.S. Savchuk,N.I. Rybak
出处
期刊:East European journal of physics [V.N. Karazin Kharkiv National University Publishing]
卷期号: (1) 被引量:1
标识
DOI:10.26565/2312-4334-2021-1-06
摘要

The ZE10 magnesium alloy with the rare-earth metal additives, which contribute to a better forming of the alloy, was used as studied material. The ZE10 magnesium alloy with the rare-earth metal additives, which contribute to a better forming of the alloy, was used as studied material. Sheet material is usually straightened on roller levelers to relieve residual stresses and improve flatness. The metal is subjected to alternating deformation by bending when straightening. The changes in the structure, crystallographic texture and, as a result, physical and mechanical properties occur in the metal are often not taken into account in the future. The elastic modulus is an important parameter, for example, in the production of products using bending. In this work, the elastic modulus of sheets of magnesium alloy ZE10 was estimated in three main directions. A starting sheet was obtained by extruding an ingot, then rolling in the longitudinal direction and then rolling with a change in direction by 90° after each pass in combination with heating to 350°C. The original sheets were subsequently subjected to alternate folding. Evaluations were made of the elastic modulus of the original sheet, as well as the sheets after 0.5, 1.0, 3.0 and 5.0 alternating bending cycles. To estimate the elastic modulus, we used the Kearns texture parameters , which we calculated from the inverse pole figures, as well as the elastic constants of the single crystal of the ZE10 alloy found by us. The maximum deviation of the calculated and experimental values of the elastic modulus did not exceed 5.2%. Strong correlations and quadratic regression equations have been established between the values of the elastic modulus, mechanical characteristics (tensile strength, yield stress, elongation), on the one hand, and the above-mentioned parameters of the Kerns texture, on the other hand. The approximation reliability coefficients are 0.76 - 0.99.

科研通智能强力驱动
Strongly Powered by AbleSci AI
更新
PDF的下载单位、IP信息已删除 (2025-6-4)

科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
科研通AI2S应助王鹏采纳,获得10
刚刚
刚刚
刚刚
伶俐的招牌完成签到,获得积分10
2秒前
香蕉觅云应助祁纯采纳,获得10
2秒前
Jasper应助cyclone采纳,获得10
3秒前
过时的柔发布了新的文献求助10
3秒前
4秒前
May发布了新的文献求助10
4秒前
5秒前
6秒前
深情傲柔完成签到,获得积分10
13秒前
王鹏完成签到,获得积分10
14秒前
沉静青寒完成签到,获得积分10
14秒前
14秒前
椿人完成签到 ,获得积分10
14秒前
闻巷雨完成签到 ,获得积分10
16秒前
feifan123完成签到,获得积分20
16秒前
17秒前
moyu37完成签到,获得积分10
17秒前
Orange应助受伤的碧曼采纳,获得10
17秒前
18秒前
好好学习发布了新的文献求助10
19秒前
20秒前
20秒前
852应助feifan123采纳,获得10
21秒前
绵绵完成签到,获得积分10
22秒前
王鹏发布了新的文献求助10
23秒前
不爱吃韭菜完成签到 ,获得积分10
24秒前
Xuan_Y完成签到,获得积分10
24秒前
量子星尘发布了新的文献求助10
24秒前
25秒前
cyclone发布了新的文献求助10
26秒前
27秒前
个木完成签到 ,获得积分20
29秒前
袁莱发布了新的文献求助20
30秒前
32秒前
n20091223发布了新的文献求助200
34秒前
科研通AI2S应助袁莱采纳,获得10
37秒前
zeno123456完成签到,获得积分10
37秒前
高分求助中
传播真理奋斗不息——中共中央编译局成立50周年纪念文集 2000
The Oxford Encyclopedia of the History of Modern Psychology 2000
Chinesen in Europa – Europäer in China: Journalisten, Spione, Studenten 1200
Deutsche in China 1920-1950 1200
中共中央编译局成立四十周年纪念册 / 中共中央编译局建局四十周年纪念册 950
Applied Survey Data Analysis (第三版, 2025) 850
Mineral Deposits of Africa (1907-2023): Foundation for Future Exploration 800
热门求助领域 (近24小时)
化学 材料科学 医学 生物 工程类 有机化学 物理 生物化学 纳米技术 计算机科学 化学工程 内科学 复合材料 物理化学 电极 遗传学 量子力学 基因 冶金 催化作用
热门帖子
关注 科研通微信公众号,转发送积分 3876329
求助须知:如何正确求助?哪些是违规求助? 3418863
关于积分的说明 10710840
捐赠科研通 3143502
什么是DOI,文献DOI怎么找? 1734384
邀请新用户注册赠送积分活动 836786
科研通“疑难数据库(出版商)”最低求助积分说明 782804