冷却液
电池(电)
电池组
相变材料
水冷
核工程
乳状液
材料科学
计算机冷却
能源消耗
热的
汽车工程
机械工程
功率(物理)
热力学
工程类
电气工程
电子设备和系统的热管理
物理
化学工程
作者
Naixing Yang,Juan Wang,Shiwei Xu,Jianxiao Zheng,Liangliang Wang,Juan Yu
摘要
This work proposes a novel liquid-cooling system that employs the phase change material (PCM) emulsion as the coolant for the battery pack. To compare the proposed scheme with the traditional water cooling system, a thermal model is developed for the battery pack with cooling systems, where the system start-stop control and time hysteresis phenomenon are considered in simulations. The results show that either increasing the inlet velocity or temperature improves the battery temperature uniformity for the two schemes, but it enlarges the pumping energy consumption during the whole discharging process. Compared with the water cooling system, the proposed PCM emulsion cooling scheme can not only significantly decrease the battery temperature difference but also effectively shorten the system operating time. According to the calculation, the pumping energy consumption with using the PCM emulsions as the coolant decreases 18.9% in minimum and 66.6% in maximum than that with using the water as the coolant. Consequently, the proposed PCM emulsion cooling system is superior to the water cooling system in terms of the heat dissipation capacity, the temperature uniformity, the pump power requirement, and the pumping energy consumption, which is well-suited for the cooling system of the battery pack in electric vehicles. In addition, the proposed thermal model can be used well to simulate the thermal characteristics of the vehicle-mounted battery liquid-cooling system under actual operating conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI