Development of a Repetitive Wave Erection Marx Generator

A repetitive ten-stage wave erection Marx generator is developed to investigate the electrical characteristics of such compact devices and potentially provide an economical approach to realize the miniaturization of intense electron beam accelerators. Compact design has been made for the generator in order to achieve a proper stray capacitance of the spark gap electrode with respect to the ground in each stage because these proper grounded stray capacitances are critical for obtaining a good wave erection process. This generator is initially resistively isolated for single-shot tests and then changed to inductively isolated for repetitive operation. In single-shot experiments, the generator is tested to be able to deliver a high-voltage pulse of 210 kV and a rise time of about 5 ns on a 90-Omega dummy load at a charging voltage of 40 kV. This result agrees basically with that of the PSpice circuit simulation, which adopts a self-breakdown spark gap model. The preliminary experimental results of repetitive operation show that at a charging voltage of 30 kV, the generator can operate at 8.5 Hz without gas blow-off from the internal spark gaps, producing an output pulse of 150 kV and a rise time of less than 20 ns. Differences in the output pulse waveforms between resistively and inductively isolated configurations are analyzed.