材料科学
磨料
共晶体系
奥斯特瓦尔德成熟
摩擦学
粘着磨损
分层(地质)
合金
往复运动
相(物质)
降水
复合材料
磨损系数
冶金
微观结构
热力学
纳米技术
化学
俯冲
有机化学
构造学
气象学
古生物学
气体压缩机
物理
生物
作者
Fevzi Kafexhiu,Bojan Podgornik,Darja Feizpour
出处
期刊:Metals
[Multidisciplinary Digital Publishing Institute]
日期:2020-02-01
卷期号:10 (2): 208-208
被引量:22
摘要
In the present study, wear behavior as a function of aging time was evaluated for the AlCoCrFeNi2.1 eutectic complex, concentrated alloy (CCA) consisting of B2 (BCC), and L12 (FCC) lamellae in the as-cast state. By aging the material at 800 °C up to 500 h, precipitation of a fine, evenly dispersed micro-phase inside the L12 takes place. From 500 h to 1000 h of aging, precipitates coarsen by the Ostwald ripening mechanism. Reciprocating wear tests were characterized by a prevailing abrasive wear mechanism, while adhesive and delamination wear components change with aging conditions. The L12 phase with lower hardness in the as-cast material preferentially deformed during the wear test, which was not the case after aging the material, i.e., with the presence of precipitates. Aging-induced changes show a similar trend for the coefficient of friction and L12 + precipitates phase fraction, whereas changes in specific wear rate are in a good agreement with changes in B2 phase fraction. In general, aging the AlCoCrFeNi2.1 CCA at 800 °C up to 500 h decreases its coefficient of friction due to reduced adhesive wear component and enhances its wear performance through precipitation strengthening.
科研通智能强力驱动
Strongly Powered by AbleSci AI