Efficient ternary polymer solar cells by optimizing photogenerated exciton dissociation and photon harvesting with a short wavelength absorption polymer acceptor as the third component

Ternary blend films, obtained by introducing a third component (a second acceptor as the third component) to a binary polymer solar cell (PSC), are a promising ternary strategy because the light absorption range, surface morphology, and charge carrier transport of the photoactive layer may be optimized, as can the energy level alignment between the donor and the acceptor. In this work, acceptors such as the short-wavelength-absorption polymer N2200 and the long-wavelength-absorption small molecule FOIC were combined with the donor PBDB-T-2F to construct ternary blends. The optimized ternary PSC could achieve a power conversion efficiency (PCE) of 13.98%, which is higher than the efficiencies of binary PSCs based on PBDB-T-2F:FOIC (12.65%) and PBDB-T-2F:N2200 (9.36%). The enhanced PCE of the ternary PSC is based on the high electron mobility, balanced charge transport, optimized surface morphology and charge carrier kinetics and the extended light absorption of the ternary photoactive layer, realized by adjusting the ratio of FOIC:N2200. Our results indicate that mixing a polymer acceptor into a binary photoactive layer to form a ternary blend photoactive layer is a valuable strategy for improving photovoltaic performance.