聚合物
高岭石
伊利石
矿物学
材料科学
地质学
岩土工程
复合材料
粘土矿物
作者
R. S. Seright,Dongmei Wang
出处
期刊:Spe Journal
[Society of Petroleum Engineers]
日期:2022-03-23
卷期号:27 (05): 2863-2881
被引量:20
摘要
Summary Associated with the Milne Point polymer flood (on Alaska’s North Slope), this paper explores the unusual shape of hydrolyzed polyacrylamides (HPAM) breakout/propagation during dynamic polymer retention measurements in Milne Point core material. In contrast to conventional expectations, polymer retention does not delay the initial polymer arrival at the end of a Milne Point core. However, after effluent polymer concentrations rapidly rise to at least 50% of the injected value, the concentration gradually “tails” up over many pore volumes (PVs) before it finally achieves the injected value. To understand the origin and significance of this behavior, a wide range of core experiments were performed, including substantial variations in polymer concentration and molecular weight, core length, preservation state, sand grain size, and mineral composition. Illite was identified as primarily responsible for the tailing phenomenon. This phenomenon has important consequences that must be considered when projecting the performance of the field project. This work suggests that mineralogy analysis (especially for illite and kaolinite) may reveal whether tailing should be accounted for during simulations of polymer propagation/retention in a given field application.
科研通智能强力驱动
Strongly Powered by AbleSci AI