整体
光催化
动能
扩散
机械
反应速率
材料科学
核工程
化学
热力学
催化作用
物理
量子力学
工程类
生物化学
作者
Md. Moazzem Hossain,Gregory B. Raupp,Steven O. Hay,Timothy N. Obee
出处
期刊:Aiche Journal
[Wiley]
日期:1999-06-01
卷期号:45 (6): 1309-1321
被引量:142
标识
DOI:10.1002/aic.690450615
摘要
Abstract A first‐principles mathematical model describes performance of a titania‐coated honeycomb monolith photocatalytic oxidation (PCO) reactor for air purification. The single‐channel, 3‐D convection–diffusion–reaction model assumes steady‐state operation, negligible axial dispersion, and negligible homogeneous reaction. The reactor model accounts rigorously for entrance effects arising from the developing fluid‐flow field and uses a previously developed first‐principles radiation‐field submodel for the UV flux profile down the monolith length. The model requires specification of an intrinsic photocatalytic reaction rate dependent on local UV light intensity and local reactant concentration, and uses reaction‐rate expressions and kinetic parameters determined independently using a flat‐plate reactor. Model predictions matched experimental pilot‐scale formaldehyde conversion measurements for a range of inlet formaldehyde concentrations, air humidity levels, monolith lengths, and for various monolith/lamp‐bank configurations. This agreement was realized without benefit of any adjustable photocatalytic reactor model parameters, radiation‐field submodel parameters, or kinetic submodel parameters. The model tends to systematically overpredict toluene conversion data by about 33%, which falls within the accepted limits of experimental kinetic parameter accuracy. With further validation, the model could be used in PCO reactor design and to develop quantitative energy utilization metrics.
科研通智能强力驱动
Strongly Powered by AbleSci AI