材料科学
复合材料
空化
天然橡胶
复合数
极限抗拉强度
丁苯橡胶
数字图像相关
结块
刚度
聚合物
苯乙烯
共聚物
物理
机械
作者
Carlos Eloy Federico,Hiron Raja Padmanathan,Ondřej Kotecký,Robert Rommel,G. Rauchs,Y.H. Fleming,Frédéric Addiego
出处
期刊:Polymer Testing
[Elsevier BV]
日期:2021-06-16
卷期号:100: 107274-107274
被引量:17
标识
DOI:10.1016/j.polymertesting.2021.107274
摘要
Cavitation phenomena were resolved in silica-filled styrene-butadiene-rubber composite upon cyclic tensile testing, prior to and after an accelerated thermal exposure. To this end, 3D digital image correlation (3D-DIC) and micro-computed x-ray tomography (μCT) were employed with in-situ approaches. It was found that thermal exposure induced structural changes in the composite similar to those occurring in real tires, such as the increase of the crosslink density of the rubber matrix, and the increase of its stiffness. The 3D-DIC measurements revealed that the mechanical hysteresis and volume strain were higher in the thermally-treated composite. The μCT results indicated three types of cavitation phenomenon as sources of volume change: i) debonding at the agglomerate poles, ii) internal agglomerate fracture and iii) a combination of both of them. Cavities were initially oblate and became more spherical when stretching the materials. The μCT measurements confirmed a faster increase in size and sphericity of voids for the thermally-treated composite when deformed, which is probably due to the higher stiffness of the rubber matrix.
科研通智能强力驱动
Strongly Powered by AbleSci AI