质子交换膜燃料电池
流量(数学)
机械
电流(流体)
阴极
材料科学
倾斜(摄像机)
块(置换群论)
质量流
电流密度
功率(物理)
频道(广播)
领域(数学)
流线、条纹线和路径线
流速
计算机模拟
流量测量
核工程
流体力学
功率密度
机械工程
计算流体力学
流动条件
两相流
燃料电池
电极
模拟
电子工程
烧蚀
工程类
电气工程
磁场
强度(物理)
激光烧蚀
作者
Mingge Wu,Mengbin Gao,Zhanqi Mao,Chunqi Gao,Qianxi Sun,Qiangqiang Gu,Ao Chen
出处
期刊:ACS omega
[American Chemical Society]
日期:2026-02-06
卷期号:11 (6): 10785-10797
被引量:1
标识
DOI:10.1021/acsomega.5c13005
摘要
High Resolution Image Download MS PowerPoint Slide A well-designed flow field structure can effectively reduce mass transport losses in Proton Exchange Membrane Fuel Cell (PEMFC) under high current densities. Most optimization designs focus on two-dimensional equidistant-depth flow fields, while research on nonequidistant-depth three-dimensional flow fields remains limited. This study introduces a novel nonequidistant-depth 3D flow field and utilizes rapid laser ablation technology to fabricate metal bipolar plates. Numerical simulations are performed to analyze gas flow velocity, reactant distribution, and fuel cell performance across flow field structures with varying inclinations and trapezoidal block heights. Results indicate that optimal fuel cell performance is achieved with a flow field where the channel tilt height and trapezoidal block height are both 0.3 mm. Compared to the parallel flow field, the proposed design significantly enhances flow velocity at the Channel-GDL interface and ensures a higher, more uniform reactant concentration at the GDL-CL interface. The maximum power density reaches 1.551 W/cm 2, representing a 39.48% increase, with only a 10.79% rise in water content, highlighting effective water management.
科研通智能强力驱动
Strongly Powered by AbleSci AI