压阻效应
材料科学
气凝胶
缓冲垫
碳纳米管
压力传感器
灵敏度(控制系统)
卷积神经网络
标度系数
多孔性
复合材料
耐久性
模数
传感器阵列
坐
碳纤维
计算机科学
工作(物理)
声学
纳米技术
纤维
光电子学
弹性体
捆绑
光纤传感器
惯性测量装置
智能传感器
作者
Chuanxi Lin,Yongzhen Wang,Yulin Zeng,Yuan Liu,Ronghui Guo,Guanli Wu,Si Hui Pan,Liu Li,Jiatong Yan,Hong Tang,Ronghui Guo
出处
期刊:Small
[Wiley]
日期:2026-09-24
卷期号:: e75906-e75906
摘要
ABSTRACT The sitting‐posture monitoring strategies based on visual capture or inertial measurement units cannot be widely adopted because of light occlusion, privacy concerns, and wearing discomfort. In this work, a flexible piezoresistive sensor array based on the short‐cut carbon fiber‐reinforced carbon nanotube (CNT)/thermoplastic polyurethane (TPU) aerogel sensor (SCT) for sitting posture recognition was proposed. The results show that the compressive modulus of SCT 3 can be increased to 0.623MPa compared with pure TPU aerogel (0.053MPa), showing a low density (0.159 g/cm 3 ) as well as high porosity (90.1%) due to the enhancement and supporting effect of short‐cut carbon fiber (SF) in the matrix. The pressure sensing range of SCT 3 reaches 382 kPa, and good sensitivity (3.01kPa −1 ) as well as durability (3500 cycles) can meet the real‐time monitoring requirements of high pressure on hips. Additionally, an anti‐crosstalk 8 × 8 array acquisition circuit was proposed to adapt the flexible array cushion, and a simple convolutional neural network was used to recognize five sitting postures, including proper posture, kyphosis, leaning forward, left‐leaning, and right‐leaning. This work proposes a sitting posture recognition strategy in a piezoresistive sensor array, which provides a promising approach to monitor sitting postures for adolescents.
科研通智能强力驱动
Strongly Powered by AbleSci AI