Anti-fingerprint glass surface created by mechanical removal process

The use of various types of information devices equipped with touch panels has been increasing. When these devices are used directly with fingers, the devices become dirty owing to sweat and oil from users. Therefore, there is considerable interest in keeping the surfaces of devices free from fingerprints and dirt. Antifouling films and coatings are being developed for this purpose. In addition, a method of changing the surface shape by adding a microstructure to a material surface has been developed. The purpose of this study is to add the antifouling function to glass surfaces using a mechanical removal process. We attempted to change the surface shape by processing a material surface directly. The processing method was microslurry-jet (MSJ) processing, which is a mechanical removal method. In addition, a masking process was used to create microsurface structures. As an example, we evaluated the anti-fingerprint glass created by these processing methods. Microsurfaces were successfully created on the glass surface through the combination of the masking process and MSJ processing. Moreover, the visibility of the created glass, surface characteristics, friction characteristics, and the adhesion of stains were evaluated. With respect to visibility, surface characteristics, and adhesion, it was possible to observe the changes in surface characteristics due to the microsurfaces. With regard to friction characteristics, differences in surface patterns were found for individual subject data.