钝化
材料科学
钙钛矿(结构)
能量转换效率
光电子学
光伏系统
电子迁移率
钙钛矿太阳能电池
量子效率
图层(电子)
短路
开路电压
纳米技术
电压
化学工程
生态学
物理
量子力学
工程类
生物
作者
Nabilah Alias,Akrajas Ali Umar,Nurul Ain Abd Malek,Kai Liu,Xiaoguo Li,Nur Adliha Abdullah,Mohd Mustaqim Rosli,M. Y. A. Rahman,Zejiao Shi,Xin Zhang,Haijuan Zhang,Fengcai Liu,Jiao Wang,Yiqiang Zhan
标识
DOI:10.1021/acsami.0c20137
摘要
A deficiency in the photoelectrical dynamics at the interface due to the surface traps of the TiO2 electron transport layer (ETL) has been the critical factor for the inferiority of the power conversion efficiency (PCE) in the perovskite solar cells. Despite its excellent energy level alignment with most perovskite materials, its large density of surface defect as a result of sub lattice vacancies has been the critical hurdle for an efficient photovoltaic process in the device. Here, we report that atoms thick 2D TiS2 layer grown on the surface of a (001) faceted and single-crystalline TiO2 nanograss (NG) ETL have effectively passivated the defects, boosting the charge extractability, carrier mobility, external quantum efficiency, and the device stability. These properties allow the perovskite solar cells (PSCs) to produce a PCE as high as 18.73% with short-circuit current density (Jsc), open-circuit voltage (Voc), and fill-factor (FF) values as high as 22.04 mA/cm2, 1.13 V, and 0.752, respectively, a 3.3% improvement from the pristine TiO2-NG-based PSCs. The present approach should find an extensive application for controlling the photoelectrical dynamic deficiency in perovskite solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI