The Reconsitution of the Weld Pool Surface in Stationary TIG Welding Process With Filler Wire

Abstract In order to study the dynamic characteristics of the weld pool surface during the TIG welding process of the filler wire, an observation test platform for the study of the three-dimensional surface behavior evolution of the TIG weld pool based on the grid structure laser was used to observe the weld pool surface and obtain the reflection grid laser image. The three-dimensional surface evolution of the fixed-point TIG welding pool is accurately restored by the three-dimensional recovery algorithm of the weld pool surface, so as to obtain the three-dimensional surface morphology of the weld pool. The difference between the obtained weld pool height and the experimental results is very small, and the results are basically the same.