Erucamide/thermoplastic polyurethane blend with low coefficient of friction, high elasticity and good mechanical properties for intelligent wearable devices

Abstract In this study, erucamide as a non‐toxic and tasteless lubricant was melt blended with thermoplastic polyurethane (TPU) to reduce the coefficient of friction (COF) of TPU and thus to improve the wearing comfort of intelligent wearable devices. The results show that when the content of erucamide reaches percolation, erucamide can migrate to the TPU surface, forming a layer of lubrication film, and thus significantly reduces the COF of TPU. In addition, erucamide with amide groups can form hydrogen bonds with carbamate groups from TPU chains and thus can disrupt the hydrogen bonds between two amide groups of TPU chains. With the introduction of erucamide, the chain mobility of TPU increases, the partial phase mixing of soft phase and hard phase of TPU occurs, and the interchain interaction between TPU chains decreases. Under the appropriate content of erucamide (0.5 wt%), both the elasticity and processability of TPU are also significantly improved, whereas the high tensile strength, tear strength and elongation at break of the TPU blend is still obtained, facilitating its practical application in intelligent wearable devices. © 2022 Society of Industrial Chemistry.