A Strategy for Studying Environmental Engineering: Simple Hydrothermal Synthesis of Flower-Shaped Stannous Sulfide Nanomaterials for Efficient Cataluminescence Sensing of Diethyl Ether

In this work, flower-like stannous sulfide (SnS) nanomaterials are synthesized using a hydrothermal method and used as sensitive materials for cataluminescence (CTL)-based detection of diethyl ether. Gas sensors based on SnS nanomaterials are prepared, and the SnS nanomaterials exhibit excellent gas-sensitive behavior towards ether. High sensitivity to ether is achieved at a relatively low operating temperature (153 °C) compared to other common sensors. The response time is 3 s and the recovery time is 8 s. The CTL intensity shows a good linear relationship (R2 = 0.9931) with a detection limit of 0.15 ppm and the concentration of ether in the range of 1.5–60 ppm. The proposed CTL sensor shows good selectivity towards ether. In addition, a highly stable signal is obtained with a relative standard deviation of 1.5%. This study indicates that the SnS-based sensor has excellent gas-sensitive performance and shows potential for applications in the detection of ether.