Interfacing the enzyme multiheme cytochrome c nitrite reductase with pencil lead electrodes: Towards a disposable biosensor for cyanide surveillance in the environment

Abstract The present study reports a novel voltammetric biosensor for cyanide based on its inhibitory effect on cytochrome c nitrite reductase (ccNiR). Interestingly, the earlier development of a point-of-care test for nitrite based on the direct electrochemistry of ccNiR has shown that the cyanide inhibition depends on the type of carbon material employed as transducer ( Monteiro et al., 2019 ). In this work, commercial graphite pencil leads were employed in the construction of both working and pseudo-reference electrodes, with ccNiR being simply drop casted onto the former. In this way, we produced a functional and fully integrated voltammetric biosensor for nitrite quantification that also allows to observe a decrease in the catalytic current due to cyanide addition. Under turnover conditions, the biosensor showed a linear response with the logarithm of cyanide concentration in the 5–76 μM (cyclic voltammetry) and 1–40 μM (square-wave voltammetry) ranges, with a sensitivity of 20–25% ln [cyanide μM]−1 and a detection limit of 0.86–4.4 μM. The application of the pencil lead as a putative pseudo-reference was very promising, since the potentials profile matched those observed with a true reference electrode (Ag/AgCl). Overall, the direct electron transfer between ccNiR and a pencil lead electrode was demonstrated for the first time, with cyanide-induced inhibition being easily monitored, paving the way for the employment of these low-cost bioelectrodes as cyanide probes for on-site surveillance of aquatic environments.