CaO-based high temperature CO2 sorbents – Literature review

The use of CaO-based adsorbents has a high potential to capture CO 2 from various systems due to its high reactivity with CO 2 , high capacity, and low cost of naturally derived CaO.The application of CaO-based sorbents to remove carbon dioxide is based on a reversible reaction between CaO and CO 2 .However, multiple carbonation/calcination cycles lead to a rapid reduction in the sorption capacity of natural CaO, and therefore efforts are made to reduce this disadvantage by doping, regenerating, or producing synthetic CaO with stable sorption properties.In this review, the synthesis methods used to obtain CaO-based sorbents were collected, and the latest research on improving their sorption properties was presented.The most commonly used models to describe the CO 2 sorption kinetics on CaO-based sorbents were also introduced.The methods of sorbent regeneration and their effectiveness were summarized.In the last part of this review, the current state of advancement of work on the larger scale, possible problems, and opportunities during scale-up of the calcium looping process were presented.Concluding (i) the presented methods of adsorbent synthesis allow for the production of doped CaO adsorbents on a laboratory scale, characterized by high CO 2 capture efficiency and good cyclic stability, (ii) the most commonly used in practice models describing CO 2 chemisorption are empirical models and the shrinking core model, (iii) the use of sorbent regeneration allows for a significant improvement in sorption capacity, (iv) the scale-up of both the production of new CaO adsorbents and the CO 2 capture technology with their use requires further development.