Effect of aggregate size on the slump and uniaxial compressive strength of concrete: a DEM study

The aggregate size and particle-size distribution (PSD) can change the packing density, slump, and strength of concrete. The micromechanical effects of aggregate size on the slump and strength remain unclear. The current numerical study examined concrete behavior using slump and uniaxial compressive strength (UCS) tests considering the aggregate size distribution using the discrete element method. The effect of the aggregate size on the packing density, UCS, and slump of the concrete was analyzed. To accomplish this, we evaluated how variations in the uniformity and curvature coefficients of the PSD, as well as the specific surface area of the samples, were affected by changes in aggregate size. Although the simulations were based on standard specimens from the laboratory, the results showed good agreement with the documented experimental results. Briefly, at a 40–60% fine aggregate content, the packing density and compressive strength of the concrete reached their peaks and caused a decrease in the height of the slump. The uniformity and curvature coefficients did not influence the slump height. The induced shear band could be tracked during the UCS tests and the crack angles could be measured. At the optimum fine content (40–60%), the shear bands were primarily localized and propagated through the samples having different fine contents.