可再生能源
工艺工程
氨
环境科学
废物管理
储能
功率(物理)
氨生产
氢气储存
氢
发电
生产(经济)
汽车工程
储罐
电力系统
风力发电
材料科学
工程类
计算机科学
电网储能
制氢
可再生资源
抽蓄发电
作者
Jiaxin Xu,Zhipeng Yu,Jin Lin,Feng Liu,Ruixiao Lin,Yingtian Chi,Yonghua Song
标识
DOI:10.1109/tste.2026.3692247
摘要
Renewable power to ammonia (ReP2A) offers a promising route for renewable energy utilization. To fully utilize volatile renewable generation without breaking process continuity, ReP2A systems require hydrogen storage subsystems with storage tanks and compressors. However, the conventional layout of hydrogen storage subsystems can cause significant hydrogen supply pressure variations, restricting the ReP2A system to a semi-steady-state operation inadequate for handling renewable fluctuations. In practice, feedforward control based on shortterm forecasts is widely employed, yet forecast errors necessitate substantial grid electricity purchases to maintain continuity. This coupling between power and chemical manufacturing increases grid peak-shaving pressure and undermines economic benefits. To address these challenges, a novel hydrogen storage subsystem with a parallel-connected compressor is proposed to enhance pressure regulation, alongside a capacity allocation method and a state-transition-based PID (ST-PID) control strategy. Furthermore, a multi-timescale framework embeds the ST-PID controller to bridge real-time control and long-term optimization. Case studies with real-world data demonstrate that the proposed system unlocks the flexibility for renewable consumption and shows robustness against prediction errors, reducing grid electricity reliance by 38.56% and lowering the levelized cost of ammonia by 8.75%. This offers dual benefits in promoting renewable integration and enhancing economic performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI