材料科学
聚氨酯
结晶度
差示扫描量热法
混溶性
化学工程
聚二甲基硅氧烷
玻璃化转变
异佛尔酮二异氰酸酯
高分子化学
铸造
触变性
复合材料
聚合物
物理
工程类
热力学
作者
Guiqiang Fei,Yiding Shen,Haihua Wang,Yue Shen
摘要
Abstract A series of waterborne polyurethane (WPU) derived from isophorone isocyanate and poly(tetramethylene glycol) were modified by hydroxyl‐terminated polydimethylsiloxane (HPMS). The solutions were then cast into films named as PUHS. Rheological behavior of the emulsions were studied using Rheometer and morphology was studied with transmission electron microscope. Meanwhile, the casting films were prepared from the WPU/HPMS hybrid dispersions, and their glass transition behavior, miscibility, water resistance, and medium resistance were studied with differential scanning calorimeter (DSC), wide‐angle X‐ray diffraction (WAXD), and so on. The results revealed that the emulsions' particle size decreases with increasing HPMS content and the particles are more easily affixed to each other when the HPMS content is more than 15%, and emulsions are endowed with pseudoplasticity and thixotropy. WAXD and DSC figures manifested that the casting films all exhibited a certain degree of miscibility. The degrees of crystallinity (xc) decreased with increasing HPMS content, and the PUHS films were almost amorphous. It is noticed that water and medium absorption increased in the HPMS/PU compared to pure PU, which demonstrate that the membrane surfaces have excellent water and chemical medium repellency. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5538–5544, 2006
科研通智能强力驱动
Strongly Powered by AbleSci AI