Development of a hall-effect based skin sensor

In this paper we introduce a prototype of a novel hall-effect based skin sensor for robotic applications. It uses a small sized chip that provides 3-axis digital output in a compact package. Our purpose was to evaluate the feasibility of measuring 3-axis force while maintain a soft exterior for safe interactions. Silicone was used to produce the soft skin layer with about 8 mm thickness. An MLX90393 chip was installed at the bottom of layer, with a small magnet approximately 5mm above it to measure 3-axial magnetic field data. To evaluate the sensor's performance, an experiment was conducted by measuring normal and shear force when applying total forces of 0.7-14N in the normal and tangential directions of the sensor. The test revealed that the sensor prototype was able to differentiate the components of the force vector, with limited crosstalk. A calibration was performed to convert the measurements of the magnetic field to force values.