无量纲量
射弹
光滑粒子流体力学
机械
残余物
穿孔
粒径
材料科学
粒子(生态学)
航程(航空)
灵敏度(控制系统)
物理
数学
复合材料
工程类
冲孔
冶金
地质学
海洋学
化学工程
电子工程
算法
作者
Ruiyu Li,Yuxin Sun,Qiran Sun,Yayun Zhao,Jiangtuo Feng
标识
DOI:10.1142/s021987621750044x
摘要
In this paper, perforations of 12[Formula: see text]mm thick Weldox 460E steel plates by 20[Formula: see text]mm diameter blunt projectiles are simulated based on Two-dimensional Smoothed Particle Hydrodynamics method (SPH), and the modified Johnson–Cook (MJC) material model is adopted. To describe the shear plugging process, the particle approximation between different materials is canceled, and only the particle contact model based on the principle of conservation of momentum is applied. Then the separation of projectile and plug is simulated successfully, which is consistent with the experimental observations. Furthermore, it can be found that the particle size has a great influence on the calculation by comparing the effects of the different SPH particle sizes on plugging calculations. In general, the smaller the particle size is, the greater the residual velocity of projectile is. The residual velocities are tending towards stability as the decrease of particle size. Taking computational efficiency and accuracy into consideration, 0.033 (size[Formula: see text][Formula: see text][Formula: see text]0.4[Formula: see text]mm) is the most appropriate dimensionless particle size. Then, the effect of target thickness on perforation is conducted, which shows that the target thickness has certain influence on the global deformation of target. Moreover, the sensitivity of MJC material constants on the residual velocity of projectile is also analyzed and discussed using orthogonal experimental design method and the range analysis method. The results indicate that the most sensitivity parameter is yield strength [Formula: see text], followed by strain hardening modulus [Formula: see text] and strain hardening exponent [Formula: see text].
科研通智能强力驱动
Strongly Powered by AbleSci AI