聚合物
溶解度
超临界流体
粘度计
提高采收率
粘度
化学
浊点
倾点
毛细管作用
化学工程
热力学
材料科学
有机化学
水溶液
复合材料
物理
工程类
作者
Shiyang Zhang,Yuehui She,Yongan Gu
摘要
In this paper, two commercial polymers, poly(vinyl ethyl ether) (PVEE) and poly(1-decene) (P-1-D), are tested to thicken CO 2 for CO 2 enhanced oil recovery (EOR). First, a series of laboratory tests are conducted to measure the cloud-point pressures of either polymer at different polymer solubilities in supercritical CO 2 and the equilibrium interfacial tensions (IFTs) of a light crude oil-pure or polymer-thickened CO 2 system under different reservoir conditions. Second, a capillary viscometer is used to measure the viscosities of polymer-thickened CO 2 at different test pressures. Third, a total of six high-pressure CO 2 coreflood tests are performed to examine the effects of polymer-thickened CO 2 on the total CO 2 EOR. It is found that at the same and low polymer solubility in pure CO 2, the measured cloud-point pressure of PVEE is much lower than that of P-1-D. The measured equilibrium IFT for polymer-thickened CO 2 at a high pressure is much lower than that for pure CO 2 . The PVEE- or P-1-D-thickened CO 2 viscosity is approximately (13 to 14) times higher than the pure CO 2 viscosity. The CO 2 coreflood test results show that PVEE- or P-1-D-thickened CO 2 flooding can further enhance oil recovery after a pure CO 2 breakthrough. The CO 2 breakthrough can be significantly delayed if polymer-thickened CO 2 is injected directly.
科研通智能强力驱动
Strongly Powered by AbleSci AI