Graphitic carbon nitride/NH2-MIL-101(Fe) composite for environmental remediation: Visible-light-assisted photocatalytic degradation of acetaminophen and reduction of hexavalent chromium

Abstract Herein, an efficient photocatalyst composed of graphitic carbon nitrate and iron-based metal-organic framework (g-C3N4 / NH2-MIL-101(Fe)) composite was fabricated by a solvothermal method for the degradation of acetaminophen (AAP) and reduction of Cr(VI) under sunlight illumination. The composite was confirmed by X-ray diffraction. UV–visible spectra showed that the bare g-C3N4, pure Fe-MOF, and composite harvest solar light effectively. The photocatalytic experiment indicated that the composite exhibited superior reduction efficiency of Cr(VI) (66%) compared to the bare g-C3N4 (35%) and pure Fe-MOF (51%) at pH 7. As the pH decreases from 9 to 2, the reduction efficiency increased. The highest Cr(VI) reduction (91%) was observed at pH 2. On the other hand, the catalyst degraded 94% of AAP at pH 7 compared to the bare g-C3N4 (42%) and pure Fe-MOF (60%) in the presence of hydrogen peroxide. A radical scavenger experiment endorsed that the generation of superoxide radicals was the main reason for the AAP degradation. The cyclic stability test indicated that there was no substantial decrease in the degradation efficiency of AAP after ten repeated cycles. The kinetic studies showed that the photodegradation of AAP and reduction Cr(VI) was well-fitted to the first-order kinetics. Gas chromatography-mass spectrometry analysis showed that hydroquinone, aliphatic carboxylic acids, monohydroxy, and dihydroxy paracetamol were the main products formed as a result of such degradation process. Therefore, the iron-based MOF and their composites can be used as effective photocatalysts for pollutants degradation.