材料科学
压电
纳米发生器
复合材料
聚偏氟乙烯
纳米纤维
结晶度
能量收集
弹性体
成核
天然橡胶
静电纺丝
涂层
复合数
模数
压电系数
纳米压痕
相间
聚氨酯
电压
纳米复合材料
聚合物
开路电压
功率密度
作者
Chunjin Ai,Wei Zhang,Yucheng Pan
摘要
ABSTRACT Self‐powered flexible piezoelectric devices based on polyvinylidene fluoride (PVDF) face a critical trade‐off between piezoelectric output and mechanical flexibility. In this study, an amine‐terminated liquid butadiene rubber (ATPB) toughened PVDF/BaTiO 3 (BTO) flexible nanofiber membrane is fabricated via electrospinning to achieve an optimized balance between piezoelectric output and mechanical durability. The ATPB coating serves as a low‐modulus elastomeric interphase on BTO nanoparticles, mitigating the modulus mismatch and suppressing interfacial stress concentration while maintaining high ductility, with elongation at break exceeding 33%. Through the combined effects of chemical hydrogen bonding from ATPB and heterogeneous nucleation of BTO, the relative content of polar β‐phase reaches 62.4% (Lambert–Beer law) and 60.1% (multi‐peak intensity ratio method), with a β‐phase absolute crystallinity of 33.38%. The assembled piezoelectric nanogenerator (PENG) produces a stable open‐circuit voltage of 10–15 V, representing an approximately 2–3 fold enhancement over pure PVDF devices. The short‐circuit current reaches 7 μA, with a peak power density of ~4 μW cm −2 , and the device retains ~92.3% output after 5000 cycles. This research provides an effective strategy for developing flexible PVDF‐based materials for energy harvesting and wearable sensors.
科研通智能强力驱动
Strongly Powered by AbleSci AI