灵敏度(控制系统)
过程(计算)
津贴(工程)
钥匙(锁)
推力
机械工程
蒙特卡罗方法
推进
导弹
工程类
工程设计过程
汽车工程
激光跟踪器
推进剂
实验设计
测量不确定度
焊接
计算机科学
计量学
表征(材料科学)
准确度和精密度
模拟
金属薄板
标准差
过程能力指数
计算机辅助设计
模式(计算机接口)
传感器融合
制作
作者
Chenguang Gao,Zhaopu Yao,Jun Chen,Tao Zhang,Yu Liu,Rui Yang,Gaoshi Su
出处
期刊:Aerospace
[Multidisciplinary Digital Publishing Institute]
日期:2026-09-11
卷期号:13 (9): 833-833
标识
DOI:10.3390/aerospace13090833
摘要
Laser powder bed fusion (L-PBF) enables the integral fabrication of thrust chamber–nozzle and injector assemblies, eliminating some assembly and welding interfaces and reducing structural redundancy. However, under this manufacturing route, as-built geometric deviations act more directly on functional features, creating new challenges for dimensional accuracy and performance stability. To address this issue, this study investigates an additively manufactured 200 N monopropellant thruster and conducts geometric-deviation characterization, deviation–performance mapping, precision allocation, and performance validation. Key forming deviations were characterized using a coordinate measuring machine, industrial CT, micro-focus CT, and confocal microscopy. A first-order geometric deviation–performance mapping model was established through CFD-based sensitivity analysis, and Monte Carlo simulation was used to evaluate performance risk. A priority evaluation system combining the process capability index (Cpk) and performance sensitivity was then developed to guide differentiated finish-machining allowance allocation, CAD model pre-compensation, and process optimization. After two closed-loop iterations, the Monte Carlo-predicted thrust nonconformance probability decreased from 8.5% to 1.2%, and the simulated injection-flow non-uniformity narrowed from ±8.7% to ±4.2%. Cold-flow measurements showed that injection-flow non-uniformity decreased from ±9.3% to ±4.8%. In the rated-condition hot-fire test of the compensated thruster, the measured steady-state thrust deviation was controlled within ±1.5%, while the throat-diameter Cpk increased from 0.56 to 1.45. These results demonstrate that the proposed “inspection–analysis–allocation–compensation” closed-loop method can integrate performance sensitivity with actual manufacturing capability and provide an implementable route for precision-resource allocation and engineering optimization of integrated additively manufactured propulsion components.
科研通智能强力驱动
Strongly Powered by AbleSci AI