Oblique penetration performance of Explosively Formed Projectile (EFP) on 6061 aluminum target:experiments and simulations

In this paper, the penetration resistance of 6061 aluminum plates to explosively formed projectiles (EFPs) at the incidence angles of 0°, 15°, 30°, and 45° was studied. The penetration process was roughly divided into three typical stages—the plastic flanging stage of the target, the righting stage of the projectile, and the plug formation stage of the target. Through the energy analysis, the energy consumption of the aluminum plate increased with the increase in the incidence angle during the entire penetration process. Through the microscopic analysis of the perforated wall surface of the aluminum plate, it was found that there were distinct boundaries and differences between the plastic reaming zone and the punching plug fracture zone.. Overall, four kinds of classification modes were proposed for the damage of the aftereffect plate, which provides a method to evaluate the aftereffect of EFP oblique penetration into 6061 aluminum plates.