硫酸盐
化学
群(周期表)
疏水效应
化学工程
有机化学
工程类
作者
Yue Gu,Ming Zhou,Hongjun Tu
标识
DOI:10.1016/j.molliq.2022.120346
摘要
• A series of sulfate Gemini surfactants with different hydrophobic chains and linking groups were synthesized. • The heat resistance, Krafft points, CMC, surface tension, emulsification were tested and evaluated in detail. • The linking groups and hydrophobic groups had a certain effect on the properties of sulfate Gemini surfactants. • The III 2a with C 14 and -(CH 2 ) 2 - had the best foam performance at 0.4wt% with the V max =780mL and t 1/2 =330s. From the perspective of molecular design, a series of sulfate Gemini surfactants with different hydrophobic chains and linking groups were synthesized by etherification, ring opening and sulfation. The structures of the products were characterized by IR and 1 H-NMR. The synthesized sulfate Gemini surfactants had good heat resistance, especially the surfactants with rigid linking groups, measured by thermogravimetric analysis. The synthetic surfactants had low Krafft points, wherein the Krafft points of the surfactants with a carbon chain of 12 were less than 0 °C. With increasing hydrophobic carbon chain length or decreasing methylene number of linker, their CMC and γ cmc first decreased and then increased. The γ cmc of surfactants with rigid linking groups were higher and their CMCs were lower. It is analyzed by the calculated surface activity parameters (pC 20 , Γ max , A min ) that with increasing hydrophobic chain length, the surface activity of synthetic surfactants increased first and then decreased, and the surfactant with hydrophobic carbon chain C 14 had the best surface activity. The influences of the length of the linking group and the hydrophobic group on the emulsifying capacity, wetting property, calcium soap dispersion and foam property of the surfactants were also analyzed. It was an attempt to explore and design excellent Gemini surfactants.
科研通智能强力驱动
Strongly Powered by AbleSci AI