A Study for Development of Real-Scale Thermal Filter Press Dewatering (TFPD)

Real-scale thermal filter press dewatering equipment (plate size: 630 mm × 630 mm) was installed and operated at a waterworks for one year in an attempt to achieve sludge reduction. During the period, the dewaterability was evaluated according to the seasonal sludge properties in order to compare the dewaterability of thermal dewatering and mechanical dewatering, as well as to determine the economics of thermal dewatering. According to the results, the winter season sludge showed a 36% decrease in water content and a two-thirds reduction in dewatering velocity compared to the summertime sludge. In addition, the dewatered cakes of the thermal filter press dewatering equipment showed a lower specific cake resistance and water content in the dewatered cakes than the mechanical filter press dewatering equipment, indicating superior dewaterability. This was attributed to the easier removal of the filtrate remaining in the capillary tubes due to thermal dewatering. The energy consumption for thermal dewatering was 300 kJ/dry solids (DS) kg. A comparison of the sludge dryers indicated that it is possible to produce dewatered cakes that consume less energy and can be recycled. According to the performance evaluation results, the real-scale thermal filter press dewatering equipment had high adaptability to the changes in seasonal sludge, showing excellent dewaterability compared to the mechanical filter press dewatering equipment, and was economical due to the lower energy consumption.