Rapid and Reliable Method for Quantification of Mycobacterium paratuberculosis by Use of the BACTEC MGIT 960 System

ABSTRACT A simple method for the enumeration of viable Mycobacterium paratuberculosis cells was developed and evaluated using the MGIT 960 culture system. For each of 12 M. paratuberculosis strains isolated from either cattle or humans, single-cell suspensions of M. paratuberculosis cells were adjusted to an optical density at 600 nm of 1.00 (10 7.6 to 10 8.2 cells/ml), and serial dilutions were prepared. Standard curves were established by relating the MGIT time-to-detection data to the log 10 CFU for these suspensions using standard plate counting and BACTEC 460 results as reference methods. Universal and strain-specific standard quantification curves were generated. A one-phase exponential decay equation best fit the universal standard curve and strain-specific curves ( R 2 of 0.96 and >0.99, respectively). Two subgroups within the universal curves were distinguished: one for laboratory-adapted strains and the other for recently isolated low-passage bovine strains. The predictive errors for log 10 estimations using the universal standard curve, each subgroup's standard curve, and strain-specific curves were ±0.87, ±0.45, and ±0.31 log 10 units, respectively. CFU estimations by all three standard curves were highly reproducible, regardless of the M. paratuberculosis strain or inoculum volume. In comparison with the previously described BACTEC 460 M. paratuberculosis counting method, quantification with MGIT 960 was less expensive, more rapid, more accurate, and more sensitive (<10 CFU). This MGIT counting method has broad applications for studies requiring the quantification of viable M. paratuberculosis cells, such as drug susceptibility testing or environmental survival studies.