Optimization of Charpy‐impact strength of 3D ‐printed carbon fiber/polyamide composites by Taguchi method

田口方法 夏比冲击试验 材料科学 复合材料 正交数组 填充 艾氏冲击强度试验 塑料挤出 实验设计 结构工程 极限抗拉强度 数学 工程类 统计
作者
Bertan Beylergil,Abdulrahman Al‐Nadhari,Mehmet Yıldız
出处
期刊:Polymer Composites [Wiley]
卷期号:44 (5): 2846-2859 被引量:55
标识
DOI:10.1002/pc.27285
摘要

Abstract This study utilizes the Taguchi optimization technique to investigate the effects of FDM processing parameters on the Charpy impact strength of 3D printed CF/PA composites experimentally and statistically. The four 3D printing parameters employed in the experiment are the infill density, raster angle, extruder temperature, and printing speed, which were used to create the experimental plan with the L18 orthogonal array. Signal to noise (S/N) ratios and analysis of variance (ANOVA) were utilized to identify the optimum values and the interactions between the process parameters. SEM and thermography techniques were employed to assess the microstructural and damage status of the CF/PA composite specimens. ANOVA results determined that only three factors–infill density, raster angle, and extruder temperature–had a statistical significance, while printing speed did not. The outcomes demonstrated that the optimal 3D printing parameters are infill density (100%), raster angle (60°), extruder temperature (260°C), infill density (100%), and printing speed (30 mm/s), with the maximum contribution of 54.19% belonging to infill density, and the minimum contribution of 2.84% belonging to printing speed. The optimal combination of these 3D printing parameters yielded a Charpy impact strength of 10.54 kJ/m2, resulting in an increase of almost 150% compared to the worst‐case situation. The Taguchi approach proves to be a proficient technique to boost the Charpy impact strength of 3D‐printed CF/PA composites.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
Ava的应助被肖子瑶采纳,获得30
1秒前
Luxi发布了新的文献求助10
1秒前
1秒前
全都一次过完成签到 ,获得积分10
2秒前
2秒前
zzzzz发布了新的文献求助10
3秒前
Goddess完成签到,获得积分10
3秒前
雪雪发布了新的文献求助10
4秒前
美丽大河马完成签到,获得积分20
4秒前
DW的应助被mm采纳,获得10
4秒前
4秒前
hyk发布了新的文献求助10
5秒前
5秒前
molihuakai的应助被Luxi采纳,获得10
6秒前
6秒前
xuderui发布了新的文献求助10
6秒前
毕业好工作完成签到,获得积分10
7秒前
府中园马完成签到,获得积分10
7秒前
Listen完成签到,获得积分10
8秒前
小马甲的应助被handeny采纳,获得10
8秒前
斯文败类的应助被Goddess采纳,获得10
9秒前
9秒前
orixero的应助被AA采纳,获得10
10秒前
10秒前
10秒前
錦銘发布了新的文献求助10
10秒前
田様的应助被张智磊采纳,获得10
10秒前
荼蘼发布了新的文献求助10
10秒前
科研通AI2S的应助被落寞冬萱采纳,获得10
11秒前
魏同心完成签到,获得积分10
11秒前
11秒前
诗雨完成签到,获得积分20
11秒前
努力的小天完成签到 ,获得积分10
12秒前
13秒前
13秒前
王丫丫完成签到,获得积分10
14秒前
凡华完成签到 ,获得积分10
14秒前
15秒前
ufofly730完成签到 ,获得积分0
15秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
Resource Recovery Handbook 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8175157
求助须知:如何正确求助?哪些是违规求助? 9566975
关于积分的说明 21789458
捐赠科研通 7769647
什么是DOI,文献DOI怎么找? 3431836
关于科研通互助平台的介绍 2556078
邀请新用户注册赠送积分活动 2477241