材料科学
成核
涂层
微观结构
过饱和度
复合材料
碳纤维
微晶
化学气相沉积
化学工程
硅
纳米技术
冶金
复合数
有机化学
化学
工程类
作者
Linjing Wang,Zhaoke Chen,Bowen Wang,Yue Li,Ruiqian Zhang,Guiliang Liu,Zongbei He,Daogui Fu,Haoran Wang,Xiang Xiong
标识
DOI:10.1016/j.ceramint.2018.06.165
摘要
Abstract SiC coatings with different content of free carbon were deposited on polycrystalline silicon substrate by chemical vapor deposition (CVD) by using CH3SiCl3-H2-Ar reactive system. The composition, microstructure and micro-mechanical properties of coatings were investigated. The results show that, when H2/MTS is 10, there is no free carbon in coatings. However, at the ratio of H2/MTS of 8.89, 7.97 and 7.32, the content of free carbon is falling in the range of 0.025–0.065, 0.100–0.800 and 0.005–0.035 respectively. The supersaturation of [H] is a key factor to control the generation of free C and the nucleation and growth of SiC coating. As to mechanical properties of SiC coatings, there may be a critical value of the content of free carbon in the coating. When the content of carbon is less than the critical value, the free carbon can enhance the mechanical properties of the coating; otherwise, the free carbon weakens the mechanical properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI