正方体卫星
最小移位键控
无线电接收机设计
计算机科学
发射机
有效载荷(计算)
解调
电子工程
信号(编程语言)
卫星
工程类
电信
相移键控
误码率
网络数据包
航空航天工程
频道(广播)
程序设计语言
计算机网络
作者
Achmad Munir,Nazmi Febrian,Antrisha Daneraici Setiawan,Chairunnisa
标识
DOI:10.1109/icitacee.2016.7892487
摘要
The vessel monitoring system at the sea which mainly uses Automatic Identification System (AIS) technology will be more effective if it is combined with the satellite technology. This id due to the satellite can cover reach thousands of kilometers when orbiting in the space. Unfortunately, the process of receiving AIS signals from the transmitter has the problem of very low received power that reaches up to −102.07dBm. Therefore the simulation design of CubeSat AIS receiver is required for analyzing received signal prior the deployment. This paper present the signal analysis of CubeSat AIS receiver constructed based on Gaussian Minimum Shift Keying (GMSK) modulation. The AIS receiver as a payload of CubeSat is intended to operate at frequency of 162.025 MHz. It is designed to receive AIS signals in the orbit at an altitude of 650km. The GMSK demodulation of AIS receiver is simulated using an electronic circuit simulation software. The simulation result shows that the CubeSat AIS receiver can receive AIS signals under appropriate conditions satisfying link budget calculation.
科研通智能强力驱动
Strongly Powered by AbleSci AI