光掩模
光学接近校正
初始化
过程(计算)
平版印刷术
光刻
计算机科学
算法
工作流程
极小极大
材料科学
反向
瓦片
人工智能
反问题
过程控制
公制(单位)
可微函数
光学
管道(软件)
极限(数学)
替代模型
工艺设计
工艺优化
模式识别(心理学)
线性搜索
计算机视觉
多路复用
作者
zongyu lei,Libin Zhang,Dinghai Rui,侯新伟 Hou Xinwei,Xiaojing Su,Yayi Wei
摘要
In photomask manufacturing, process-induced contour errors after electron-beam writing and downstream processing can limit pattern fidelity even when the target layout is geometrically well defined. Mask process correction (MPC) precompensates the written layout, but conventional model-based MPC can require repeated process evaluation and local geometry updates for dense, contour-rich layouts. This study presents CAUNet (Contour-Aware U-Net)-MPC, a learning-assisted workflow that combines supervised process identification and reference-mask initialization with self-supervised process-consistency optimization. Under one fixed industrial electron-beam lithography condition, contour-aware U-Nets are trained from coordinate-aligned target patterns and measured contours and then fixed as differentiable process surrogates. An inverse CAUNet initialized from reference MPC masks is subsequently trained by a cross-surrogate minimax objective over two heterogeneous frozen process models. On a guarded spatial test split, three process surrogates achieved mean intersection-over-union (IoU) values of 0.9895–0.9899 and mean tile EPE95 values of 1.937–1.981 nm against measured contours. Under PA, CAUNet-MPC reduced mean tile EPE95 from 33.288 nm for No MPC, 13.184 nm for the actual industrial reference masks, and 13.056 nm for the locked warm-start network to 1.862 ± 0.062 nm across three single-network correction chains, while increasing IoU to 0.995 552 ± 0.000 222. The second optimization surrogate and a held-out architecture-transfer surrogate yielded 1.866 ± 0.205 and 1.877 ± 0.088 nm, respectively. These results establish CAUNet-MPC as a robust self-supervised route for fixed-process MPC candidate generation.
科研通智能强力驱动
Strongly Powered by AbleSci AI