磁流变液
阻尼器
振动
振动控制
工程类
结构工程
加速度
控制理论(社会学)
管道(软件)
PID控制器
隔振
控制工程
计算机科学
声学
机械工程
物理
控制(管理)
温度控制
经典力学
人工智能
作者
Xiaomin Dong,Hao Wu,Pingyang Li,Lifan Wu,Jinchao Ran,Kaixiang Wang
标识
DOI:10.1177/1045389x231220837
摘要
Due to fluid excitation and the vibration of connected equipment, industrial pipelines are prone to long-term medium-high frequency and small amplitude vibration. Magnetorheological (MR) dampers with a multi-stage squeeze plate structure were proposed to solve the problem of medium-high frequency vibration in the industrial pipeline. The dynamic characteristics of the industrial pipeline were analyzed to determine the installation position of the MR dampers. The mechanical properties of the proposed squeeze-mode MR dampers were tested, and the hyperbolic tangent mechanical model of the MR damper was established. The vibration control model of the industrial pipeline was built for simulation analysis. In addition, the Acceleration-Driven-Damper (ADD) control and the Proportional-Integral-Derivative (PID) control were used for simulation to predict the vibration reduction effect. Constant current experiments and control algorithm experiments were carried out on the vibration control platform of the industrial pipeline. The experimental results show that the maximum vibration attenuation rate of the MR dampers with constant current reaches 61.95%, while those with ADD control and PID control are 65.43% and 67.46%, respectively. Therefore, the squeeze-mode MR dampers can effectively reduce the medium-high frequency vibration of the industrial pipeline, and the control algorithms can further improve the vibration reduction performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI