比较器
逐次逼近ADC
CMOS芯片
计算机科学
常量(计算机编程)
电子工程
物理
噪音(视频)
电气工程
电容器
工程类
校准
作者
S J Zhang,Cheng Yuan,Qiuwei Wang,W M Wang,Yao Li,Mao Ye,Yong Chen
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2026-05-24
卷期号:: 2308-2312
标识
DOI:10.1109/iscas66217.2026.11562697
摘要
This paper presents a high-speed single-channel successive approximation register (SAR) analog-to-digital converter (ADC) featuring constant input common-mode for comparators. The proposed ADC employs a partial loop-unrolled (LU) SAR architecture, which reduces half of the number of comparators compared to the traditional fully LU architecture. Specifically, the first four bits are converted using a conventional SAR structure that integrates a bit-dependent capacitive digital-to-analog converter (CDAC) settling technique. The remaining four bits are processed by the LU structure. One redundancy bit is incorporated to relax the requirements of the CDAC settling in the SAR structure. By utilizing an improved set-and-down switching scheme and optimized comparators, the ADC ensures that the input common-mode voltage of comparators remains constant through the whole conversion process. Implemented in a 28nm CMOS process, the ADC occupies a core circuit area of only 0.001 mm2. Post-layout simulation results demonstrate that the SNDR and SFDR are 42.51 dB and 55.94 dB with a Nyquist input, respectively, and that the power consumption is 2.06 mW, leading to a Walden figure-of-merit (FoM) of 18.9 fJ/conversion-step.
科研通智能强力驱动
Strongly Powered by AbleSci AI