NURBS-Based Parametric Design for Ship Hull Form

Recently, the NURBS technique has been widely used in the 3D design software for ships. However, in most research, the NURBS technique is only applied to the mathematical representation of hull curves and surfaces, and the parametric deformation of hull surfaces based on geometric feature parameters is less understood. The aims of this paper are to establish the parametric design process of hull surfaces through the classification of geometric feature parameters and the design of feature curves, apply the NURBS technique to the parametric geometric modeling of hull curves and surfaces, and finally achieve the parametric deformation of hull surfaces driven by geometric feature parameters and develop the parametric deformation software. Taking the Series 60 ship as an example, we first analyze the hull geometric features and parameters, then design the longitudinal feature curves and cross-section curves based on the NURBS technique and establish the correlation between them, and finally generate the smooth hull surface by the skinning technique to achieve the parametric geometric deformation of the Series 60 ship. The research in this paper shows that the smoothness of the surfaces generated by the NURBS-based parametric design method is good. Additionally, the extracted feature parameters have a clear geometric meaning and can automatically generate hull forms to meet the design requirements quickly and effectively, which has some practical engineering value.