电解质
环氧乙烷
电化学
材料科学
离子电导率
阳极
氧化物
阴极
锂(药物)
异氰酸酯
化学工程
金属
无机化学
电极
化学
聚合物
复合材料
共聚物
聚氨酯
工程类
冶金
内分泌学
医学
物理化学
作者
Chengzhou Xin,Kaihua Wen,Shundong Guan,Chuanjiao Xue,Xinbin Wu,Liangliang Li,Ce‐Wen Nan
标识
DOI:10.3389/fmats.2022.864478
摘要
A cross-linked poly(ethylene oxide) (PEO)-based electrolyte with polyaryl polymethylene isocyanate (PAPI) as the cross-linking agent is synthesized by a facile one-pot reaction. The PEO chains are cross-linked by PAPI through the reaction between hydroxyl groups (−OH) and isocyanate groups (−N=C=O). The effects of PAPI on the electrochemical performance of the PEO-based electrolyte and the stability of the electrolyte/electrode interface are investigated. The PEO–PAPI electrolyte has an ionic conductivity of 9.3 × 10–5−1.3 × 10–4 S cm−1 at 60°C. The cross-linked PEO–PAPI electrolyte exhibits enhanced mechanical properties compared to pristine PEO and shows good compatibility with a lithium (Li) metal anode. An all-solid-state Li metal battery (ASSLMB) with the optimized PEO–PAPI electrolyte and a LiFePO4 cathode (1.62 mg cm−2 in mass loading) shows a discharge capacity of 112.8 mAh g−1 after 700 cycles with a current density of 88 μA cm−2 at 60°C. Even with a high mass loading of 8.4 mg cm−2, the ASSLMB with the cross-linked PEO-based electrolyte shows a good cycle performance. The experimental data show that the cross-linked PEO–PAPI electrolyte is a promising candidate for solid electrolytes used in ASSLMBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI