有限元法
应变计
钻探
变形(气象学)
结构工程
材料科学
强度(物理)
过程(计算)
动载荷
机械工程
计算机科学
工程类
复合材料
量子力学
操作系统
物理
作者
Maria G. Fernandes,Elza M M Fonseca,Renato Natal Jorge
标识
DOI:10.1177/1464420715609363
摘要
The main goal of this paper is to assess the mechanical damage in solid rigid foam materials with similar mechanical properties to the human bone induced by the cutting parameters. In the present study, a three-dimensional dynamic finite element model was developed to simulate the drilling process in solid rigid foam materials and it was validated with experimental results. Using an explicit dynamic numerical simulation, it is possible to obtain large structural deformation with high load intensity in short time frame. The developed model is used to study the effects of different high intensity loads distribution in the solid rigid foam materials. Laboratory tests were produced using biomechanical test blocks instrumented with strain gauges in different surface positions during the drilling process. The comparison between the numerical and the experimental results enables the evaluation and improvements of the cutting process. It was concluded when the feed-rate is higher, the stresses and strains in the solid rigid foam material are lower. The developed numerical model proved to be a great tool in this kind of analysis and available to use in forthcoming tests.
科研通智能强力驱动
Strongly Powered by AbleSci AI